Krautkramer USM 35X Issue 01, 04/2005 5-27
Operation
Echo comparison
You can compare the echo of any reflector of your
choice with the reference echo. The displayed result is
the dB difference of the two echoes.
H Note:
The dB difference is independent of any possible gain
variation.
– Choose Ha dB or Hb dB as measured value.
– Position the A gate over the echo.
– Select the function REFMOD.
– Activate the function by means of the right-hand
rotary knob.
The dB difference between the reference echo and
the reflector echo is now displayed as the measured
value.
Measurement of dB difference(function group REF)
Krautkramer USM 35X Issue 01, 04/2005 5-27
Operation
Echo comparison
You can compare the echo of any reflector of your
choice with the reference echo. The displayed result is
the dB difference of the two echoes.
H Note:
The dB difference is independent of any possible gain
variation.
– Choose Ha dB or Hb dB as measured value.
– Position the A gate over the echo.
– Select the function REFMOD.
– Activate the function by means of the right-hand
rotary knob.
The dB difference between the reference echo and
the reflector echo is now displayed as the measured
value.
Measurement of dB difference(function group REF)