GE Krautkramer USM 35X - General Configuration; DIALOG (Selecting the Language)

Krautkramer USM 35X Issue 01, 04/2005 5-53
Operation
5.15 General configuration
More functions for the basic configuration of the USM 35X
may be found in the function groups CFG1 and CFG2.
– If required, go to the third operating level.
– Select the function group CFG1 or CFG2.
Functions of
CFG1 CFG2:
Dialog language Date
Unit Time
Baud rate Analog output
Printer selection Horn
Assignment of the
key Evaluation mode
H Note:
Double assignment of the functions DIALOG/UNIT and
DATE/TIME. Toggle between the two functions by re-
peatedly pressing the corresponding key .
DIALOG (Selecting the language)
In this function you can select the language for dis-
playing the function names on the screen and for the
test report.
The following languages are available:
• German
• English (default setting)
• French
• Italian
General configuration
Krautkramer USM 35X Issue 01, 04/2005 5-53
Operation
5.15 General configuration
More functions for the basic configuration of the USM 35X
may be found in the function groups CFG1 and CFG2.
– If required, go to the third operating level.
– Select the function group CFG1 or CFG2.
Functions of
CFG1 CFG2:
Dialog language Date
Unit Time
Baud rate Analog output
Printer selection Horn
Assignment of the
key Evaluation mode
H Note:
Double assignment of the functions DIALOG/UNIT and
DATE/TIME. Toggle between the two functions by re-
peatedly pressing the corresponding key .
DIALOG (Selecting the language)
In this function you can select the language for dis-
playing the function names on the screen and for the
test report.
The following languages are available:
• German
• English (default setting)
• French
• Italian
General configuration