GE Krautkramer USM 35X - Setting the Display

5-50 Issue 01, 04/2005 Krautkramer USM 35X
Operation
All measured values which have also been described
for the zoomed display of the function S-DISP are
availabe to you at each position.
H Note:
As an alternative, you can display a scale in the mea-
surement line (ref. function SCALE).
– Select the function MEAS-P1 to MEAS-P4.
– Use the right-hand rotary knob to set the required
measured value for each position in the correspond-
ing function.
Configuring the USM 35X for a test application
Setting the display
In the function group LCD, you will find setting options
for the display screen itself and for the echo display.
– If required, go to the third operating level.
– Select the function group LCD.
H Note:
Double assignment of the function FILLED/VGA. Toggle
between the two functions by repeatedly pressing the
corresponding key .
5-50 Issue 01, 04/2005 Krautkramer USM 35X
Operation
All measured values which have also been described
for the zoomed display of the function S-DISP are
availabe to you at each position.
H Note:
As an alternative, you can display a scale in the mea-
surement line (ref. function SCALE).
– Select the function MEAS-P1 to MEAS-P4.
– Use the right-hand rotary knob to set the required
measured value for each position in the correspond-
ing function.
Configuring the USM 35X for a test application
Setting the display
In the function group LCD, you will find setting options
for the display screen itself and for the echo display.
– If required, go to the third operating level.
– Select the function group LCD.
H Note:
Double assignment of the function FILLED/VGA. Toggle
between the two functions by repeatedly pressing the
corresponding key .