GE Krautkramer USM 35X - Function Groups First Operating Level; Function Groups Second Operating Level

Krautkramer USM 35X Issue 01, 04/2005 5-3
OperationOverview of the functions
Function groups first operating level
BASE The functions that you find here are re-
quired for the basic adjustment of the
screen displays.
PULS Combined in this group are the functions
that serve for the adjustment of pulser.
RECV Combined in this group are the functions
that serve for the adjustment of receiver.
aGAT All functions for setting the gate A can be
found in this group.
bGAT All functions for setting the gate B can be
found in this group.
Function groups second operating level
CAL This function group makes functions for the
semiautomatic calibration available to you.
REF This function group serves for measuring
the dB difference between a reference
echo and the reflector echo.
or
AWS This is where you will find all functions for
the classification of flaws in welds accord-
ing to the AWS D1.1 specification.
or
DAC This is the function group where you can
set the functions for the DAC (only
USM 35X DAC and USM 35X S).
or
JDAC The DAC functions in this function group
are modified to allow for a flaw evaluation
according to JIS (Japanese Industrial
Standard) Z3060-2002 (only USM 35X DAC
and USM 35X S).
Krautkramer USM 35X Issue 01, 04/2005 5-3
OperationOverview of the functions
Function groups first operating level
BASE The functions that you find here are re-
quired for the basic adjustment of the
screen displays.
PULS Combined in this group are the functions
that serve for the adjustment of pulser.
RECV Combined in this group are the functions
that serve for the adjustment of receiver.
aGAT All functions for setting the gate A can be
found in this group.
bGAT All functions for setting the gate B can be
found in this group.
Function groups second operating level
CAL This function group makes functions for the
semiautomatic calibration available to you.
REF This function group serves for measuring
the dB difference between a reference
echo and the reflector echo.
or
AWS This is where you will find all functions for
the classification of flaws in welds accord-
ing to the AWS D1.1 specification.
or
DAC This is the function group where you can
set the functions for the DAC (only
USM 35X DAC and USM 35X S).
or
JDAC The DAC functions in this function group
are modified to allow for a flaw evaluation
according to JIS (Japanese Industrial
Standard) Z3060-2002 (only USM 35X DAC
and USM 35X S).