GE Krautkramer USM 35X - RGB Interface

Krautkramer USM 35X Issue 01, 04/2005 8-7
Interfaces and Peripherals
8.4 RGB interface
The RGB interface serves for the output of the VGA
signal. You can use this interface to connect the
USM 35X with a monitor or with a VGA projector
(beamer). The current display contents are then trans-
ferred to the external unit and can be further used
accordingly.
H Note:
For technical reasons it is unfortunately not possible to
maintain a stable synchronisation of both displays if
the VGA output is active. The external signal for the
connected monitor or beamer is entirely synchronised.
A flickering of the internal display has to be accepted
though. The internal display will be synchronous as
soon as the VGA output has been deactivated.
The interface is a 10-way socket type Lemo-0-B. The
standard contact assignment makes it suitable for all
VGA output units. Use the VGA adapter UM 31 (order
number 35 653) in order to connect a VGA output unit.
H Note:
Before you are able to use the RGB interface, you
have to activate the function VGA in the function group
LCD first.
RGB interface
Krautkramer USM 35X Issue 01, 04/2005 8-7
Interfaces and Peripherals
8.4 RGB interface
The RGB interface serves for the output of the VGA
signal. You can use this interface to connect the
USM 35X with a monitor or with a VGA projector
(beamer). The current display contents are then trans-
ferred to the external unit and can be further used
accordingly.
H Note:
For technical reasons it is unfortunately not possible to
maintain a stable synchronisation of both displays if
the VGA output is active. The external signal for the
connected monitor or beamer is entirely synchronised.
A flickering of the internal display has to be accepted
though. The internal display will be synchronous as
soon as the VGA output has been deactivated.
The interface is a 10-way socket type Lemo-0-B. The
standard contact assignment makes it suitable for all
VGA output units. Use the VGA adapter UM 31 (order
number 35 653) in order to connect a VGA output unit.
H Note:
Before you are able to use the RGB interface, you
have to activate the function VGA in the function group
LCD first.
RGB interface