GE Krautkramer USM 35X - Setting the Time

Krautkramer USM 35X Issue 01, 04/2005 4-13
Principles of operation
Setting the time
The function TIME (function group CFG2) serves for
setting the current hour of time. It is saved together
with the test results.
A Attention:
You should always make sure that you are using the
correct time settings. Test results may otherwise be
falsified.
Don’t forget to manually set the time when changing
from winter to summer time.
– If necessary, change to the third operation level.
– Select the function TIME in the function group CFG2.
H Note:
Double assignment of the function DATE/TIME (icon >).
Toggle between the two functions by repeatedly press-
ing the corresponding key .
– Use the left-hand rotary knob to select the value that
you want to vary, e.g. the hour.
– Use the right-hand rotary knob to vary the selected
value.
Important basic settings
Krautkramer USM 35X Issue 01, 04/2005 4-13
Principles of operation
Setting the time
The function TIME (function group CFG2) serves for
setting the current hour of time. It is saved together
with the test results.
A Attention:
You should always make sure that you are using the
correct time settings. Test results may otherwise be
falsified.
Don’t forget to manually set the time when changing
from winter to summer time.
– If necessary, change to the third operation level.
– Select the function TIME in the function group CFG2.
H Note:
Double assignment of the function DATE/TIME (icon >).
Toggle between the two functions by repeatedly press-
ing the corresponding key .
– Use the left-hand rotary knob to select the value that
you want to vary, e.g. the hour.
– Use the right-hand rotary knob to vary the selected
value.
Important basic settings