GE Krautkramer USM 35X - Functions and Remote Control Codes

Krautkramer USM 35X Issue 01, 04/2005 8-17
Interfaces and Peripherals
Functions and remote control codes
Presettings are in bold-face type. You will find a brief
description of all functions in chapter 9.1 Function
directory .
If not otherwise stated, all values refer to steel,
C = 5920 m/s.
The functions marked with * are only available in the
USM 35X DAC and USM 35X S (DAC evaluation), the
functions marked with ** are only available in the
USM 35X S (DGS evaluation).
Functions which are only availabe in connection with
the Data Logger option are marked with *** (please
also refer to the section Remote control in chapter
Option Data Logger on this subject).
Read only functions are marked with
R
.
Remote control
Function Code Range/Default Resolution
aLOGIC AM 0 = off 1
1 = pos
2 = neg
AMPLCOR** AC -25 to +25 dB / 0 0.1
ANAMODE AQ 0 = 0 volt
1 = 5 volts
ANGLE PA 0 - 90 / 0 0.1
A-SCAN AS 0 = stndard 1
1 = compare
2 = envelop
3 = peak b
4 = afreeze
5 = bfreeze
6 = cfreeze***
aSTART AD 0 - 9999 mm / 35 0.01
0 - 250" / 1.500 0.001
aTHRSH AT 10 - 90 % / 40 1
-90 - -10 % additionally with rf
ATTEN
R
BC 0 - 1101 dB 0.1
Krautkramer USM 35X Issue 01, 04/2005 8-17
Interfaces and Peripherals
Functions and remote control codes
Presettings are in bold-face type. You will find a brief
description of all functions in chapter 9.1 Function
directory .
If not otherwise stated, all values refer to steel,
C = 5920 m/s.
The functions marked with * are only available in the
USM 35X DAC and USM 35X S (DAC evaluation), the
functions marked with ** are only available in the
USM 35X S (DGS evaluation).
Functions which are only availabe in connection with
the Data Logger option are marked with *** (please
also refer to the section Remote control in chapter
Option Data Logger on this subject).
Read only functions are marked with
R
.
Remote control
Function Code Range/Default Resolution
aLOGIC AM 0 = off 1
1 = pos
2 = neg
AMPLCOR** AC -25 to +25 dB / 0 0.1
ANAMODE AQ 0 = 0 volt
1 = 5 volts
ANGLE PA 0 - 90 / 0 0.1
A-SCAN AS 0 = stndard 1
1 = compare
2 = envelop
3 = peak b
4 = afreeze
5 = bfreeze
6 = cfreeze***
aSTART AD 0 - 9999 mm / 35 0.01
0 - 250" / 1.500 0.001
aTHRSH AT 10 - 90 % / 40 1
-90 - -10 % additionally with rf
ATTEN
R
BC 0 - 1101 dB 0.1