4-12 Issue 01, 04/2005 Krautkramer USM 35X
Principles of operation
In order not to delete anything by accident, a safety
prompt is displayed in the measurement line.
– If you are sure that you want to change the unit,
press the
key belonging to the function UNIT one
more time.
The unit is now changed, the current data are
deleted.
– If you want to abort the process, press any other
key. The previous setting is kept in that case.
Setting the date
The date is saved together with the test results. You
can set it in the function DATE (function group CFG2).
A Attention:
Please take into account that the USM 35X only indi-
cates the year with two digits.
You should always make sure that you use correctly
set values of date. Test results may otherwise be falsi-
fied.
– If necessary, change to the third operation level.
– Select the function DATE in the function group
CFG2.
H Note:
Double assignment of the function DATE/TIME (icon >).
Toggle between the two functions by repeatedly press-
ing the corresponding key .
– Use the left-hand rotary knob to select the value that
you want to vary, e.g. the day.
– Use the right-hand rotary knob to vary the selected
value.
Important basic settings
4-12 Issue 01, 04/2005 Krautkramer USM 35X
Principles of operation
In order not to delete anything by accident, a safety
prompt is displayed in the measurement line.
– If you are sure that you want to change the unit,
press the
key belonging to the function UNIT one
more time.
The unit is now changed, the current data are
deleted.
– If you want to abort the process, press any other
key. The previous setting is kept in that case.
Setting the date
The date is saved together with the test results. You
can set it in the function DATE (function group CFG2).
A Attention:
Please take into account that the USM 35X only indi-
cates the year with two digits.
You should always make sure that you use correctly
set values of date. Test results may otherwise be falsi-
fied.
– If necessary, change to the third operation level.
– Select the function DATE in the function group
CFG2.
H Note:
Double assignment of the function DATE/TIME (icon >).
Toggle between the two functions by repeatedly press-
ing the corresponding key .
– Use the left-hand rotary knob to select the value that
you want to vary, e.g. the day.
– Use the right-hand rotary knob to vary the selected
value.
Important basic settings
To Next Page
Loading...
