GE Krautkramer USM 35X - Printing Data; Remote Control

Krautkramer USM 35X Issue 01, 04/2005 8-9
Interfaces and Peripherals
Printing data
The USM 35X enables a direct printout of data, for
example a report including the echo display and the
instrument settings.
To do this, select the printer driver in the function
PRINTER (function group CFG1) and just press the
key after having initialized and activated the printer.
The data selected by you in the function COPYMOD
(function group CFG1) are printed.
For more details on this, please refer to chapter 6.
Data exchange
8.6 Remote control
You can use a connected PC for the remote control of
the USM 35X.
The data transfer is carried out by means of a remote
control program and the corresponding remote control
commands. These commands represent instructions
referring to the individual functions of the USM 35X.
The program Crosstalk can for example be used as
remote control program under DOS. In Windows based
systems it is possible to use e.g. the Terminal program.
After the remote control program has been started and
the program interface has been configured, the com-
mands are input via the keyboard of the computer. In
this connection, please observe the following differen-
tiation:
• Interrogation of a value or state of a USM 35X
function using the command structure:
<ESC> <COMMAND> <RETURN>
The USM 35X transmits the value of the current setting.
Krautkramer USM 35X Issue 01, 04/2005 8-9
Interfaces and Peripherals
Printing data
The USM 35X enables a direct printout of data, for
example a report including the echo display and the
instrument settings.
To do this, select the printer driver in the function
PRINTER (function group CFG1) and just press the
key after having initialized and activated the printer.
The data selected by you in the function COPYMOD
(function group CFG1) are printed.
For more details on this, please refer to chapter 6.
Data exchange
8.6 Remote control
You can use a connected PC for the remote control of
the USM 35X.
The data transfer is carried out by means of a remote
control program and the corresponding remote control
commands. These commands represent instructions
referring to the individual functions of the USM 35X.
The program Crosstalk can for example be used as
remote control program under DOS. In Windows based
systems it is possible to use e.g. the Terminal program.
After the remote control program has been started and
the program interface has been configured, the com-
mands are input via the keyboard of the computer. In
this connection, please observe the following differen-
tiation:
• Interrogation of a value or state of a USM 35X
function using the command structure:
<ESC> <COMMAND> <RETURN>
The USM 35X transmits the value of the current setting.