GE Krautkramer USM 35X - Function Directory

9-2 Issue 01, 04/2005 Krautkramer USM 35X
Appendix Function directory
9.1 Function directory
The functions marked with * are only available on the
USM 35X DAC / USM 35X S (DAC evaluation mode),
those market with ** are exclusively available on the
USM 35X S (DGS evaluation mode).
Function Function group Description
aLOGIC aGAT Evaluation logic of the gate A
AMPLCOR** DGS Amplitude correction
ANAMOD CFG2 Setting of the analog output
ANGLE TRIG Entry of the angle for calculating
the (reduced) projection
distance (angle-beam probes)
A-SCAN MEAS Settings of the A-scan
aSTART aGAT Starting point of the gate A
aTHRSH aGAT Threshold of the gate A
ATTEN DGS Sound attenuation in the test
piece
Function Function group Description
ATT-REF** DGS Sound attenuation in the
reference block
ATT-OBJ** DGS Sound attenuation in the
test object
aWIDTH aGAT Width of the gate A
BAUD-R CFG1 Baud rate for serial port
transmission
bLOGIC bGAT Evaluation logic in the gate B
BOLDLI JDAC Selection and emphasizing of
registration curve
bSTART bGAT Starting point of the gate B
bTHRSH bGAT Starting point of the gate B
bWIDTH bGAT Width of the gate B
CAL CAL Semiautomatic calibration
COLOR TRIG Marking of legs
COMMENT DATA Comment
9-2 Issue 01, 04/2005 Krautkramer USM 35X
Appendix Function directory
9.1 Function directory
The functions marked with * are only available on the
USM 35X DAC / USM 35X S (DAC evaluation mode),
those market with ** are exclusively available on the
USM 35X S (DGS evaluation mode).
Function Function group Description
aLOGIC aGAT Evaluation logic of the gate A
AMPLCOR** DGS Amplitude correction
ANAMOD CFG2 Setting of the analog output
ANGLE TRIG Entry of the angle for calculating
the (reduced) projection
distance (angle-beam probes)
A-SCAN MEAS Settings of the A-scan
aSTART aGAT Starting point of the gate A
aTHRSH aGAT Threshold of the gate A
ATTEN DGS Sound attenuation in the test
piece
Function Function group Description
ATT-REF** DGS Sound attenuation in the
reference block
ATT-OBJ** DGS Sound attenuation in the
test object
aWIDTH aGAT Width of the gate A
BAUD-R CFG1 Baud rate for serial port
transmission
bLOGIC bGAT Evaluation logic in the gate B
BOLDLI JDAC Selection and emphasizing of
registration curve
bSTART bGAT Starting point of the gate B
bTHRSH bGAT Starting point of the gate B
bWIDTH bGAT Width of the gate B
CAL CAL Semiautomatic calibration
COLOR TRIG Marking of legs
COMMENT DATA Comment