Krautkramer USM 35X Issue 01, 04/2005 3-3
Initial start-upPower supply
– When pulling off the Lemo plug, withdraw the metal
bushing on the plug first in order to release the lock.
The power supply unit is automatically set to any nomi-
nal voltage between 90 VAC and 240 VAC.
Operation using batteries
Use either a lithium-ion battery or 6 standard C-cells
(NiCad, NiMH, or alkaline cells) for the battery opera-
tion. We recommend the use of a lithium-ion battery. It
has a higher capacity and consequently ensures a
longer operating time of the instrument.
Inserting batteries
The battery compartment is situated at the instrument
back; the lid is fastened with 2 attachment screws.
– Press the two attachment screws of the battery
compartment downward in order to loosen them.
– Lift the lid off upward. To the right in the open battery
compartment, you will see two springs and several
connection pins.
– Insert the battery into the battery compartment. To
do this, first press the right side of the battery
against the springs of the battery compartment.
Make sure that the socket on the right side of the
battery is connected with the connection pins in the
battery compartment.
Krautkramer USM 35X Issue 01, 04/2005 3-3
Initial start-upPower supply
– When pulling off the Lemo plug, withdraw the metal
bushing on the plug first in order to release the lock.
The power supply unit is automatically set to any nomi-
nal voltage between 90 VAC and 240 VAC.
Operation using batteries
Use either a lithium-ion battery or 6 standard C-cells
(NiCad, NiMH, or alkaline cells) for the battery opera-
tion. We recommend the use of a lithium-ion battery. It
has a higher capacity and consequently ensures a
longer operating time of the instrument.
Inserting batteries
The battery compartment is situated at the instrument
back; the lid is fastened with 2 attachment screws.
– Press the two attachment screws of the battery
compartment downward in order to loosen them.
– Lift the lid off upward. To the right in the open battery
compartment, you will see two springs and several
connection pins.
– Insert the battery into the battery compartment. To
do this, first press the right side of the battery
against the springs of the battery compartment.
Make sure that the socket on the right side of the
battery is connected with the connection pins in the
battery compartment.
To Next Page
Loading...
