GE Krautkramer USM 35X - Default Settings for the DGS Measurement; Selecting the DGS Mode

Krautkramer USM 35X Issue 01, 04/2005 5-73
OperationEvaluation according to the DGS method (only USM 35X S)
Selecting the DGS mode
– If required, go to the third operating level.
– Select the function group CFG2.
– Switch the function EVA-MOD over to the setting
DGS.
– Go to the second operating level.
– Select the function group DGS.
Double assignment of functions:
The following functions are double assigned. Toggle
between the two functions by repeatedly pressing the
corresponding key
.
DGSMEN> DGSMEN>
Calling the DGS menu Switching on/off the
DGS evaluation mode
T-CORR> OFFSET>
Setting the transfer Activating the multi-curve
correction display mode
Default settings for the DGS measurement
In the next step, the DGS menu is called enabling to
select the corresponding probe and to set the other
DGS parameters:
– Select the function DGSMEN.
– Use the right-hand rotary knob to call the DGS menu.
Krautkramer USM 35X Issue 01, 04/2005 5-73
OperationEvaluation according to the DGS method (only USM 35X S)
Selecting the DGS mode
– If required, go to the third operating level.
– Select the function group CFG2.
– Switch the function EVA-MOD over to the setting
DGS.
– Go to the second operating level.
– Select the function group DGS.
Double assignment of functions:
The following functions are double assigned. Toggle
between the two functions by repeatedly pressing the
corresponding key
.
DGSMEN> DGSMEN>
Calling the DGS menu Switching on/off the
DGS evaluation mode
T-CORR> OFFSET>
Setting the transfer Activating the multi-curve
correction display mode
Default settings for the DGS measurement
In the next step, the DGS menu is called enabling to
select the corresponding probe and to set the other
DGS parameters:
– Select the function DGSMEN.
– Use the right-hand rotary knob to call the DGS menu.