GE Krautkramer USM 35X - BAUD-R (Baud Rate for Transmission); COPYMOD (Assignment of the Key); PRINTER (Printer for Test Report)

Krautkramer USM 35X Issue 01, 04/2005 5-55
Operation
BAUD-R (Baud rate for transmission)
In this function you can select the baud rate for the
serial port transmission. You have a choice between
300, 600, 1200, 2400, 4800, 9600, 19200, 38400, and
57600 Baud.
– Select the function BAUD-R.
– Use the right-hand rotary knob to select the required
baud rate.
PRINTER (Printer for test report)
In this function you can select the connected printer for
printing out your test report.
You have a choice between the following printer types:
• Epson
• HP LaserJet
• HP DeskJet
• Seiko DPU
• HP LaserJet 1200 series
• HP DeskJet 1200 series
General configuration
H Note:
For more details on the how to print out a test report,
please refer to chapter 6
Documentation .
– Select the function PRINTER.
– Use the right-hand rotary knob to select the required
printer.
COPYMOD (Assignment of the key)
When the key is pressed, data are output to the
RS232 interface and transferred to a printer or a PC.
You can use the function COPYMOD to choose the
data to be transferred when the key is pressed. You
have the following setting options:
• hardcpy
Hardcopy of the screen contents
• report
Test report with A-scan, all relevant settings for the
inspection and space for hand-written remarks
• meas P5
The magnified value given at the right upper corner
of the A-scan
Krautkramer USM 35X Issue 01, 04/2005 5-55
Operation
BAUD-R (Baud rate for transmission)
In this function you can select the baud rate for the
serial port transmission. You have a choice between
300, 600, 1200, 2400, 4800, 9600, 19200, 38400, and
57600 Baud.
– Select the function BAUD-R.
– Use the right-hand rotary knob to select the required
baud rate.
PRINTER (Printer for test report)
In this function you can select the connected printer for
printing out your test report.
You have a choice between the following printer types:
• Epson
• HP LaserJet
• HP DeskJet
• Seiko DPU
• HP LaserJet 1200 series
• HP DeskJet 1200 series
General configuration
H Note:
For more details on the how to print out a test report,
please refer to chapter 6
Documentation .
– Select the function PRINTER.
– Use the right-hand rotary knob to select the required
printer.
COPYMOD (Assignment of the key)
When the key is pressed, data are output to the
RS232 interface and transferred to a printer or a PC.
You can use the function COPYMOD to choose the
data to be transferred when the key is pressed. You
have the following setting options:
• hardcpy
Hardcopy of the screen contents
• report
Test report with A-scan, all relevant settings for the
inspection and space for hand-written remarks
• meas P5
The magnified value given at the right upper corner
of the A-scan