GE Krautkramer USM 35X - Page 161

Krautkramer USM 35X Issue 01, 04/2005 8-13
Interfaces and PeripheralsRemote control
Example:
Request RANGE value from the USM 35X
Remote code of the range function is DW (display
width). Please note that numerical function values are
always returned as integer values with the given maxi-
mum resolution, here DW = 5000 means 50.00 mm.
Example:
Request reading at position 2 in the measurement line
Remote code of measurement position 2 is E2 (evalu-
ation 2). E2 = 10.81 means 10.81 mm (here sound
path of the echo in gate A had been displayed). Please
note that all readings are shown in that applicable
decimal format where the decimal separator is a dot.
Krautkramer USM 35X Issue 01, 04/2005 8-13
Interfaces and PeripheralsRemote control
Example:
Request RANGE value from the USM 35X
Remote code of the range function is DW (display
width). Please note that numerical function values are
always returned as integer values with the given maxi-
mum resolution, here DW = 5000 means 50.00 mm.
Example:
Request reading at position 2 in the measurement line
Remote code of measurement position 2 is E2 (evalu-
ation 2). E2 = 10.81 means 10.81 mm (here sound
path of the echo in gate A had been displayed). Please
note that all readings are shown in that applicable
decimal format where the decimal separator is a dot.