GE Krautkramer USM 35X - Page 181

Krautkramer USM 35X Issue 01, 04/2005 9-5
AppendixFunction directory
Function Function group Description
PRF-MOD PULS Setting the pulse repetition
frequency
PROBE-#** DGS Probe number
PRINTER CFG1 Selecting the printer for the test
report
RANGE BASE Setting of the range in which the
measurement is made.
RATING AWS Flaw rating as dB value
RECALL MEM Retrieving a stored data set
RECTIFY RECV Selection of rectification
REFECHO REF For storing a reference echo
for the measurement of
dB difference
REFECHO** DGS Type of the reference reflextor
used
REFMOD REF Activation of echo comparison
Function Function group Description
REFRNCE AWS Reference gain in dB
for AWS evaluation
REFSIZE** DGS Size of the reference reflector
REJECT RECV Suppression of unwanted or
spurious echo indications
SCALE LCD Choice of display mode
for the measurement line
SCHEME LCD Choice of a color scheme for
the screen display
S-DISP MEAS Zoomed display of a selected
parameter
SET-# MEM Number of the data set
SETTING DATA Display of a function list
S-REF1 CAL Reference echo 1 for calibration
S-REF2 Reference echo 2 for calibration
STO-INF DATA Saving the current additional
information
Krautkramer USM 35X Issue 01, 04/2005 9-5
AppendixFunction directory
Function Function group Description
PRF-MOD PULS Setting the pulse repetition
frequency
PROBE-#** DGS Probe number
PRINTER CFG1 Selecting the printer for the test
report
RANGE BASE Setting of the range in which the
measurement is made.
RATING AWS Flaw rating as dB value
RECALL MEM Retrieving a stored data set
RECTIFY RECV Selection of rectification
REFECHO REF For storing a reference echo
for the measurement of
dB difference
REFECHO** DGS Type of the reference reflextor
used
REFMOD REF Activation of echo comparison
Function Function group Description
REFRNCE AWS Reference gain in dB
for AWS evaluation
REFSIZE** DGS Size of the reference reflector
REJECT RECV Suppression of unwanted or
spurious echo indications
SCALE LCD Choice of display mode
for the measurement line
SCHEME LCD Choice of a color scheme for
the screen display
S-DISP MEAS Zoomed display of a selected
parameter
SET-# MEM Number of the data set
SETTING DATA Display of a function list
S-REF1 CAL Reference echo 1 for calibration
S-REF2 Reference echo 2 for calibration
STO-INF DATA Saving the current additional
information