GE Krautkramer USM 35X - Page 217

Technical specifications according to EN 12668-1
Technical specifications according to EN 12668-1Technical specifications according to EN 12668-1
Technical specifications according to EN 12668-1
Description
DescriptionDescription
Description Symbol
SymbolSymbol
Symbol Dimension
DimensionDimension
Dimension Min
MinMin
Min Average
AverageAverage
Average Max
MaxMax
Max Comment
CommentComment
Comment
GE Inspection Technologies USM 35X S_TM036060001_D-15
Interfaces
InterfacesInterfaces
Interfaces
» Outputs
» Outputs» Outputs
» Outputs - - -
»» Alarms - TTL -
»» Horn - yes -
»» Alarm gate A/B - yes - Logical OR
»»» Switching voltage U V= - 3 - HCT level with 100 Ohm
serial
»»» Max. switching current I mA 6 - Max. switching current
»»» Hysteresis % 0,5 0 0,5 Hysteresis
»»» Accuracy of the threshold % 2 - 2 Correspondig to actual
threshold
»»» Hold time t ms 20% 500 20% Hold time
»» Analog output
»»» Amplitude Gate A or B U V= - 0 - 5 - Corresponding to
100% SH
»»» Time of flight Gate A or B U V= - 0 - 5 - Corresponding to
gate width
»»» Max. switch current mA - 0,5 - Max. switch current
»»» Output impedance Ý - 100 - Output impedance
»»» Linearity % 0,5 0 0,5 8 Bit +/- 1/2 LSB
»»» Rise time V/ás - 2,5 - Rise time
»»» Fall time V/ás - 2,5 - Fall time
»»» Hold time ms - 8 - 250 - Depending on PRF
» Digital input
» Digital input» Digital input
» Digital input
Technical specifications according to EN 12668-1
Technical specifications according to EN 12668-1Technical specifications according to EN 12668-1
Technical specifications according to EN 12668-1
Description
DescriptionDescription
Description Symbol
SymbolSymbol
Symbol Dimension
DimensionDimension
Dimension Min
MinMin
Min Average
AverageAverage
Average Max
MaxMax
Max Comment
CommentComment
Comment
GE Inspection Technologies USM 35X S_TM036060001_D-15
Interfaces
InterfacesInterfaces
Interfaces
» Outputs
» Outputs» Outputs
» Outputs - - -
»» Alarms - TTL -
»» Horn - yes -
»» Alarm gate A/B - yes - Logical OR
»»» Switching voltage U V= - 3 - HCT level with 100 Ohm
serial
»»» Max. switching current I mA 6 - Max. switching current
»»» Hysteresis % 0,5 0 0,5 Hysteresis
»»» Accuracy of the threshold % 2 - 2 Correspondig to actual
threshold
»»» Hold time t ms 20% 500 20% Hold time
»» Analog output
»»» Amplitude Gate A or B U V= - 0 - 5 - Corresponding to
100% SH
»»» Time of flight Gate A or B U V= - 0 - 5 - Corresponding to
gate width
»»» Max. switch current mA - 0,5 - Max. switch current
»»» Output impedance Ý - 100 - Output impedance
»»» Linearity % 0,5 0 0,5 8 Bit +/- 1/2 LSB
»»» Rise time V/ás - 2,5 - Rise time
»»» Fall time V/ás - 2,5 - Fall time
»»» Hold time ms - 8 - 250 - Depending on PRF
» Digital input
» Digital input» Digital input
» Digital input