GE LOGIQ 5 PRO - Bep2

GE MEDICAL SYSTEMS
D
IRECTION 2380207, REVISION 7 LOGIQ™5 PRO SERVICE MANUAL
Chapter 5 Components and Functions (Theory) 5-15
5-5-2 BEP2
The Backend Processor processes the data from front end block and stores it in
The main memory and performs scan image reconstruction to display on monitor
Backend Processor(BEP) include ATX smps and UPS battery, motherboard for P4
And Pentium 4 CPU. Main memory capacity is 512Mbytes and the type of memory is
DDR266. The BEP motherboard have capability of AGP graphic functionality and sound and
Ethernet functionality in itself. So this motherboard no need additional AGP video
Card and sound card, Ethernet card. So each slot on motherboard are used for followings
- -AGP card Slot : Open
- -PCI Slot #1 : PCI Graphic Card for LCD display on the frontpanel
- -PCI Slot #2 : VIC Card
- -PCI Slot #3 : Open
- -PCI Slot #4 : PC2IP Card
- -PCI Slot #5 : Open
- -PCI Slot #6 : Open
- Storage Device :
- Hard Disk Drive
- CD R/W Drive
- Optional MO Drive
Figure 5-13 BEP2 with Intel Motherboard
P4 Mother Board
VIC Card
PC2IP Card
PC
Power
with
UPS
Battery
P4 2.0GHz
RAM
512MB
PCI
On B’d
VGA
HDD
CDRW
Drive
MOD
(Option)
EIDE
Open Slot
To LCD in
OPIO(Keyboard)
To RAI Board in Rear Panel
Patient IO
(Option)
To Monitor
PWR ONHDD LED
FAN
RS232
Modem
For
Insite
USB
BW Printer
OPIO Panel
(Keyboard)
AC 110V
PCI Graphic