GE MEDICAL SYSTEMS
D
IRECTION 2380207, REVISION 7 LOGIQ™ 5 PRO SERVICE MANUAL
Chapter 4 Functional Checks 4 - 21
4-3-12 ECG Check Out (this option is currently not available on the LOGIQ™ 5 PRO
Connect the ECG Harness and check:
Table 4-19 ECG Harness Check
Step Task to do Expected Result(s)
1.
Connect the ECG at the Connector on the Front of the
scanner.
It will display a curve along the bottom edge of the image
sector
To Next Page
Loading...
