GE LOGIQ 5 PRO - Input;Output Signals for Peripheral

GE MEDICAL SYSTEMS
D
IRECTION 2380207, REVISION 7 LOGIQ™5 PRO SERVICE MANUAL
Chapter 5 Components and Functions (Theory) 5-27
5-7-1 Input/Output Signals for peripheral
Table 5-10 Input Output signals for peripherals
Signal Name
Description Connection from/via/to
R/G/B/Sync for Color
Printer
RGB and Sync signal output for analog color
printer. 1.0Vp-p, 75ohms, unbalanced
VIC -> RAI-> BNC Connector
Cmpsit In for Color
Printer
Composite input from Color printer for diagnostic
purpose
BNC connector -> RAI -> VIC
Shutter output for Color
printer
Exposure control signal for color printer VIC -> RDI -> Mono jack
Remote RS232 port for remote control of Color printer
PC2IP -> VIC -> RDI -> 9P
DSUB connector
Composite In / S-VHS In
for VCR
Composite VCR input and S-VHS input signal for
VCR playback
BNC connectror-> RAI -> VIC
Audio L In/Audio R In for
VCR
Stereo audio input from VCR for VCR playback
RCA Jack-> RAI -> Sound
card in BEP
Composite Out / S-VHS
out for VCR
Composite VCR output and S-VHS output signal
for VCR Recording
VIC -> RAI -> SVHS
connector
Audio L Out/Audio R Out
for VCR
Stereo audio out for VCR Recording
Sound card in BEP -> RAI ->
RCA Jack
Remote RS232 port for remote control of VCR operation
PC2IP -> VIC -> RDI -> 9P
DSUB connector
Composite out for BW
printer
Composite video signal output for BW printer
1.0Vp-p, 75ohms, unbalanced
VIC -> RAI -> BNC connector
BW Shutter Shutter control signal for BW printer External -> RAI -> Mono Jack
Foot Switch
Foot switch is mechanical switch that connect a
signal to ground
Foot switch connector-> RDI -
> Keyboard
External VGA VGA signal output for external VGA monitor
Graphic card in BEP -> VIC -
> RAI -> RDI -> 15P DSUB
connector
Ethernet Standard TCP/IP Ethernet BEP -> RDI -> RJ45 conn.
Phone Line Telephone line of Modem for insite Phone jack -> RDI -> Modem