GE MEDICAL SYSTEMS
D
IRECTION 2380207, REVISION 7 LOGIQ™ 5 PRO SERVICE MANUAL
Chapter 4 Functional Checks 4 - 1
Chapter 4
Functional Checks
Section 4-1
Overview
4-1-1 Purpose of Chapter 4
This chapter provides procedures for quickly checking major functions of the LOGIQ™ 5 PRO scanner
diagnostics by using the built-in service software, and power supply adjustments.
\
Section 4-2
Required Equipment
• An empty (blank) MO Disk.
• At least one transducer. See “Probe/Connectors Usage (QG)” on page 28. for an overview.
(normally you should check all the transducers used on the system.)
Table 4-15 Contents in Chapter 4
Section Description Page Number
4-1 Overview 4-1
4-2 Required Equipment 4-1
4-3 General Procedure 4-2
4-4 Software Configuration Checks 4-20
4-5 Peripheral Checks 4-21
4-6 Peripheral Checks 4-21
4-7 Site Log 4-24
NOTICE
Most of the information pertaining to this Functional Checks chapter is found in the LOGIQ™ 5 PRO
Quick Guide (Direction Number 2380205-100).
To Next Page
Loading...
