GE Multilin D20E User Manual

134 GE INFORMATION D20E ETHERNET I/O MODULE INSTRUCTION MANUAL
APPENDIX C: D20E MODULE DNP3 SERVER PROFILE
Table 48: DNP3 Function Codes - Requests
Table 49: DNP3 Function Codes - Responds
Requests (Hex)
0. Confirm 11. Start application
1. Read 12. Stop application
2. Write 13. Save Configuration
3. Select 14. Enable unsolicited
4. Operate 15. Disable unsolicited
5. Direct Operate 16. Assign class
6. Direct Operate - No Ack 17. Delay measurement
7. Freeze 18. Record current time
8. Freeze - No Ack 19. Open file
9. Freeze Reset 1A. Close file
A. Freeze Reset - No Ack 1B. Delete file
B. Freeze at Time 1C. Get file information
C. Freeze at Time - No Ack 1D. Authenticate file
D. Clod restart 1E. Abort file
E. Warm Restart 1F. Activate configuration
F. Initialize data 20. Authentication request
10. Initialize application 21. Authentication error
Responds (Hex)
81. Response 83. Authentication response
82. Unsolicited response

GE Multilin D20E Specifications

General

Brand	GE
Model	Multilin D20E
Category	I/O Systems
Language	English