GE COMPANY
DIRECTION 5472001-1EN, REVISION 6OPTIMA CT680 SERIES AND OPTIMA CT670 INSTALLATION MANUAL
Page 82 Section 11.0 - Drill the Anchor Holes
Figure 1-62 Table Shipping Dollies
Figure 1-63 Close-up of table base connection
Item Description
1 Side Rails (two rails, black, one each side)
2 Quick Release Pins (for side rails, two on each side)
3 Dolly Ends (two, one each end)
4 Quick Release Pins (for dolly ends, two each side)
5 Table Dolly Lifting Tube (two, blue, one each side)
6 Quick Release Pins (for dolly lifting tube, two each side)
7 Front Attachment Bar (black, one; 19 mm table base bolt located under the bar, not shown)
8 Back Attachment Bar (blue, one; see Figure 1-62)
9 Table Base Bolt (see Figure 1-62)
Table 1-6 Description of Table Shipping Dollies
To Next Page
Loading...
