GE DRAFT VOLUSON™ P8 / VOLUSON™ P6
DIRECTION 5723243, R
EVISION 6 DRAFT (MAY 23, 2018) BASIC SERVICE MANUAL
Chapter 3 - Setup Instructions 3-51
6.) Color Correction. check mark Printer Hardware Color Correction
7.) Gray Balance. X = 50, Y = 50
8.) Adjustment by Color. Color(region) = Magenta Red
9.) Save the adjusted printer settings with Apply and OK. Close window and exit System Setup.
10.)Assign the printer to the remote keys P1, P2 and/or P3 ; see Section 3-7-8-1 on page 3-53
Figure 3-53 Graphic page (lightness /Color Correction)
Figure 3-54 Graphic page (Gray Balance/ Adjustment by Color)
To Next Page
Loading...
