GE RAFT VOLUSON™ P8 / VOLUSON™ P6
DIRECTION 5723243, R
EVISION 6 DRAFT (MAY 23, 2018) BASIC SERVICE MANUAL
3-92 Section 3-13 - Network Configuration
4. In the next screen click Add user(3).
5. Fill in the required information and confirm with Add User(4).
6. Check mark the appropriate user and then click Set Default Machine Contact(5).
Color of the selected user turns from BLACK to RED(6). The permanent user is created.
7. Close the window.
Figure 3-93 Add User
Figure 3-94 Confirm with Add User
Figure 3-95 Set User as Default
To Next Page
Loading...
