- 50 -
Clutch
Start the engine and increase its speed gradually to check the working condition of the clutch.
If the motorcycle fails to go and the engine stops, you should
check the clutch block. If necessary, change a new one.
摩擦片：friction piece
Front/rear suspension system
Front
Pull the front brake tight and check the absorber.
Check whether the absorber has leakage or loose.
Rear
Check the rear absorber when operating.
Check whether part of the absorber is loose or wear.
Suspend the rear wheel and check it movingly.
Check whether the suspension bushing of the engine is loose or not.
Nuts/bolts/fixed parts
Check whether nuts, bolts, fixed parts are loose or not.
If any, tightening them according to their torque force.
Rim/Tyre
To Next Page
Loading...
