41
respective capacities.
3) Status:
a. CD/DVD: CD or DVD is installed for back up usage.
b. Unknown: New installed Disk.
c. Empty: Formatted but not used in current DVR.
d. Recording Data: HDD stored Recording data but not used in
current DVR.
e. Back up Data : HDD stored backup data.
f. Other Data: Neither Backup nor Recording Data, including AVI file.
g. Damaged
Note: Disconnected Disks disappear from the Disk Menu.
2. Action:
1) None: By default.
2) Assign to Record: Initialise the selected HDD. It formats the drive
and all data on the drive is erased. External SATA HDD can be used to
extend HDD capacity. Selected HDD will be move to [Recording Disk]
after formatting.
3) Initialise for Back Up:
Selected devices, such as Media or External HDD, formatted for backup
usage. Here is the guide for backing up data to various device.
Once you press the start button, this pop-up window is displayed to
ask you to confirm the initialisation for back up: YES or NO.
4) Link Record Disk
This function is used for adding a used HDD (same model) without
formatting.
Note: There are limitations for using this function -
A. The DVR should be empty (NO HDD). If RECORDING DISKs exist, they are
not working.
B.The used HDD should be from same series. It does not work with a different
series.
C.There should be no time duplication on the HDD.
To Next Page
Loading...
