6
z Do not use substances containing alcohol, benzene, thinners or other flammable
substances to clean or maintain the equipment. The use of these substances
may lead to fire. Use a dry cloth on a regular periodic basis and wipe away the
dust and dirt that collects on the device. In dusty, humid or greasy
environments, the dust that collects around the ventilation or the slots on the
outer casing over long periods of time may become saturated with humidity and
short-circuit, leading to fire.
z Do not cut, damage, alter or place heavy items on the power cord. Any of these
actions may cause an electrical short circuit, which may lead to fire or electrical
shock.
z Do not handle the device or power cord if your hands are wet. Handling it with
wet hands may lead to electrical shock. When unplugging the cord, ensure that
you hold the solid portion of the plug. Pulling on the flexible portion of the cord
may damage or expose the wire and insulation, creating the potential for fires or
electrical shocks.
z Use only the recommended power accessories. Use of power sources not
expressly recommended for this equipment may lead to overheating, distortion of
the equipment, fire, electrical shock or other hazards.
z Do not place the batteries near a heat source or expose them to direct flame or
heat. Neither should you immerse them in water. Such exposure may damage
the batteries and lead to the leakage of corrosive liquids, fire, electrical shock,
explosion or serious injury.
z Do not attempt to disassemble, alter or apply heat to the batteries. There is
serious risk of injury due to an explosion. Immediately flush with water any
area of the body, including the eyes and mouth, or clothing that comes into
contact with the inner contents of the battery. If the eyes or mouth contact
these substances, immediately flush with water and seek medical assistance from
a medical professional.
z Avoid dropping or subjecting the batteries to severe impacts that could damage
the casings. It could lead to leakage and injury.
z Do not short-circuit the battery terminals with metallic objects, such as key
holders. It could lead to overheating, burns and other injuries.
z The supplied power supply and power cord are designed for exclusive use with
the Digital Video Recorder. Do not use it with other products or batteries. There
is a risk of fire and other hazards.