70 DIGITAL VIDEO RECORDER
Select the event source (Alarm,Motion,VLoss) you want to search for.
1) ALARM: Select Alarm Input 1~4.
2) MOTION: Select the Channel 1~16.
3) VLOSS (Video Loss): Select the Channel 1~16.
4) SYSTEM:
Inactivated
2. Users can can have multiple selections by pressing
If you select MOTION 1, and press the MENU button on the remote controller,
Time Search Chart displays the recorded data (in red) at the time motion was
triggered on channel #1. Other recorded data is shown in yellow. So users
can easily search recorded data and playback to see what happened when
motion was triggered on channel #1.
To Next Page
Loading...
