4.7.4.4 Motion Full Screen
Figure 4-117 Smart Playback – Motion Full Screen
1. First you need select a channel and click “Play”, then the icon of “Motion Full Screen”
can be active. You can click it to draw an area on the full video interface;
2. Click “Setting” button you can specify some setting for playback like “Skip Non-Focus
Video” and specify the playback speed for Non-Concerned Video and Attention-Video, also you
can specify the time before and after the events from 0 to 600 seconds.
3. Click “Search” button then the result will be shown like figure 4-113, video with Motion
will be marked color “green”, and the video will be played by the setting as you made at step 2.
To Next Page
