GW Security GW78 - 3.2 Using the Startup Wizard

Figure 3-1 Shutdown Menu
3.2 Using the Startup Wizard
By default, the Startup Wizard starts once the NVR has loaded, as shown in Figure 3-2.
Figure 3-2 Startup Wizard
Operating the Startup Wizard:
1. The Startup Wizard can walk you through some important NVR configurations. If you
don’t want to use the Startup Wizard at that moment, click the exit button. You can also
choose to use the Startup Wizard next time by leaving the “enable” checkbox checked.
2. Click Next Step button to enter the modify current password window and general
settings window, as shown in figure 3-3.