EasyManua.ls Logo

H3C S6850 Series

H3C S6850 Series
394 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20
Flags: A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,
D -- Synchronization, E -- Collecting, F -- Distributing,
G -- Defaulted, H -- Expired
Aggregate Interface: Bridge-Aggregation4
Creation Mode: Manual
Aggregation Mode: Dynamic
Loadsharing Type: Shar
Management VLANs: None
System ID: 0x8000, 2e56-cbae-0600
Local:
Port Status Priority Index Oper-Key Flag
WGE1/0/1(R) S 32768 1 1 {ACDEF}
WGE1/0/2 S 32768 2 1 {ACDEF}
WGE1/0/3 S 32768 3 1 {ACDEF}
WGE1/0/4 S 32768 4 1 {ACDEF}
Remote:
Actor Priority Index Oper-Key SystemID Flag
WGE1/0/1 32768 16387 40004 0x7b , 0001-0001-0001 {ACDEF}
WGE1/0/2 32768 16388 40004 0x7b , 0001-0001-0001 {ACDEF}
WGE1/0/3 32768 32771 40004 0x7b , 0001-0001-0001 {ACDEF}
WGE1/0/4 32768 32772 40004 0x7b , 0001-0001-0001 {ACDEF}
Example: Configuring Layer 3 gateways on a DR system
Network configuration
As shown in Figure 8:
Configure Device A and Device B as a DR system to establish one multichassis aggregate link
with Device C and one with Device D.
Set up a keepalive link between Twenty-FiveGigE 1/0/5 of Device A and Twenty-FiveGigE 1/0/5
of Device B, and exclude the interfaces from the shutdown action by DRNI MAD.
Configure two VRRP groups on Device A and Device B to provide gateway services for VLAN
100 and VLAN 200. Configure Device A as the master of the VRRP groups.

Table of Contents

Other manuals for H3C S6850 Series

Related product manuals