*#1
Sk1
/
Sk2
Owner’s Manual
96
OD / EFF (Overdrive / E ects) - continued
❺ PHASER - RATE
Adjusts the frequency speed. It is linked with the [EFFECT AMOUNT] knob.
e setting range is 0 to 127. e cycle becomes faster as the value increases.
❻ PHASER - DEPTH
Adjusts the depth of modulation.
e setting range is 0 to 127. e modulation becomes deeper as the value increases.
❼ PHASER - RESONANCE
Adjusts the resonance (feed-back) amount.
e setting range is 0 to 127. e resonance becomes greater as the value increases.
At higher values, the sound is modulated beyond normal recognition.
❽ PHASER - MANUAL
Sets the middle frequency of the phase eff ect.
e setting range is 0 to 127. e frequency becomes higher as the value increases.
❾ PHASER - MIX
Adjusts the volume balance between the “dry” and the eff ect sound.
e setting range is 0 to 127. At 0, only “dry” is heard. e eff ect level becomes great-
er as the value increases. At 127 the ratio between the “dry” and the eff ect sounds
becomes 1:1.
❿ PHASER - HPF
Controls the frequency range of the eff ect.
e setting range is 0 to 127. At 0 the eff ect is added to all frequencies. e eff ect is
added to the higher frequencies as the value increases.
Frequency
Level
Mix
Depth
Manual
Rate
Modulation
HPF
eect range
Phaser
is creates a sound with a shifting phase, adding a twisting eff ect to the sound..
❹❺❻❼
❽
❾❿
To Next Page
Loading...
Need help?
General
