-SJ -28
15-4
MACHINE SETTINGS
5_3 N525
Needle number
14 TRD. break detect
If you select "Needle" with this setting, you can set sensitivity of thread break detection needle
by needle.
You can be set up taking the following steps.
1. Follow the steps 1.- 3. on the page 15-2 and
the display shows machine setting page.
2. Press
.
3. Change the setting on the needle number
you would like to change with
.
Press when returning the setting on all the
needle numbers to default.
4. Press .
To Next Page
Loading...
