Harris ACO6800+ISD - Page 97

ACO6800+ Installation and Operation Manual 83
Copyright © 2009, Harris Corporation
Chapter 7: ACO6800+ASID Parameters, LEDs, and Alarms
PTS error Reports that the PTS repetition more than the
selected period. (Spec 700 ms) * The PTS
repetition rate adjustment is on the
ETR-290/Priority 2 Alarms page on the
Parameters tab.
22
5
CAT error Reports one or more of the following,
1) Packets with transport scrambling control not
00 present and no section with table id =
0x01present
2) Section with table id other than 0x01 not a
CAT found on PID 0x0001 *
22
5
*information taken from ETR290 May 1997
Table 7-6. ACO6800+ASID Subdevice Alarms
Alarm Name Alarm Description
Alarm Option Default Settings
Alarm
priority
Trigger (s) Clear (s)