Part 3: FlexColor for Scanners
Preventive Maintenance for Scanners
Reading the 3F Scan Log
FlexColor keeps a log of each 3F scan that you make using the Scan 3F window. This
is mostly useful when you are using a batch feeder because, in this case, you might set
up a batch and then leave the scanner for up to an hour. When you come back, you
can quickly see a record that indicates the location of your scans and shows if any
errors occurred during the batch. The log is erased each time you quick FlexColor.
To view the log, select Window > 3F Scan Log from the FlexColor menu bar.
Figure 8: Features of the 3F Scan Log window.
Preventive Maintenance for Scanners
To ensure that Flextight scanners continue to provide maximum-quality scans, their
mechanical components must be adjusted every year, every 25,000 standard scans or
every 15,000 batch-fed scans, which ever comes first.
To help remind you of when it is time to return your scanner for preventive
maintenance, the scanner stores a record of when it was last serviced and how many
standard and batch-fed scans it has made since then. You can check this record for the
currently attached scanner at any time by funning FlexColor and selecting
Maintenance > Preventive Maintenance from the menu bar.
FlexColor 4.5 Documentation Addendum 33
To Next Page
Loading...
Need help?
General
