Helmer iBX080 - Notes and Disclaimers

360179-A/B i
Document History
Revision Date CO Supersession Revision Description
A 29 JAN 2015 10311 n/a Initial release.
B 16 NOV 2022 16980 B supersedes A
Updated image and caption in Model and Input Power section.
Updated CE mark on cover and Compliance section.
Updated Schematics.
* Date submitted for Change Order review. Actual release date may vary.
Notes and Disclaimers
Condential / Proprietary Notices
Use of any portion(s) of this document to copy, translate, disassemble or decompile, or create or attempt
to create by reverse engineering or otherwise the information from Helmer Scientic products is expressly
prohibited.
Disclaimer
This manual is intended as a guide to provide the operator with necessary instructions on the proper use
and maintenance of certain Helmer Scientic products.
Any failure to follow the instructions as described could result in impaired product function, injury to the
operator or others, or void applicable product warranties. Helmer Scientic accepts no responsibility for
liability resulting from improper use or maintenance of its products.
The screenshots and component images appearing in this guide are provided for illustrative purposes
only, and may vary slightly from the actual software screens and/or product components.
Document Updates
The document is furnished for information use only, is subject to change without notice and should not be
construed as a commitment by Helmer Scientic. Helmer Scientic assumes no responsibility or liability
for any errors or inaccuracies that may appear in the informational content contained in this material. For
the purpose of clarity, Helmer Scientic considers only the most recent revision of this document to be
valid.