COMPUSHIFT II Manual – COMPUSHIFT II Manual
Specifications & Pinouts– 101
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
8.5 Cable TPS Specifications
8.5.1 Type
Cable-actuated, sealed variable resistor with spring preload
8.5.2 Chassis
Chassis is a black powder-coated aluminum box with mounting flanges. The throttle cable exits one side of
the box.
Dimensions
4.25 x 3.125 x 1.75″ (excluding mounting flanges)
Mounting Flange Dimensions
3.125 x .5″ (two flanges, opposite ends)
Mounting Slots
2 slots per flange, beveled to accept a No. 8 oval-head sheet metal screw
8.5.3 Environmental Requirements
Relative Humidity
0% – 90%
Temperature (Operating and Storage)
-30º – 85º C (-22º – 185º F)
8.5.4 Cable
Type
Steel cable in pre-lubricated high-temperature plastic housing
Mounting
Cable housing attaches to a flange with a pair of provided nuts on the threaded housing end
Dimensions
3 L x 3/8″ D
Travel
3/4″
Adjustment
Screw adjustment on cable length
Attachment
Socket-type attachment for provided stud
8.6 Connector Pinouts
Click on the link below with your transmission to view pinout details for each connector.
Pinouts for Engine Connector(see page 102)
Pinouts for Option Connector(see page 104)
Pinouts for Ford 4R70W - Black Plug(see page 106)
Pinouts for Ford 4R70W - White Plug(see page 114)
Pinouts for Ford 4R100(see page 121)
To Next Page
Loading...
Need help?
General