COMPUSHIFT II Manual – COMPUSHIFT II Manual
Monitoring & Tuning Your System– 44
•
•
4 Monitoring & Tuning Your System
The Display operates in two different modes – DASHBOARD and SETUP – and each offers a sequence of
screens with useful information:
DASHBOARD screens are available while driving and display information about your transmission,
COMPUSHIFT II and vehicle. The system displays information either in US standard or metric units, and you
can select which you prefer in SETUP mode. The next section explains the Display DASHBOARD Screens(see
page 45).
SETUP screens are available when your vehicle is stopped and the engine is off with ignition switch on.
SETUP allows you to change the Controller's programming. When COMPUSHIFT II is in SETUP mode, control
of the transmission is disabled. SETUP is covered further in Display SETUP Screens(see page 50).
The buttons functions are standard throughout the screens:
Button Function
Up / Down Arrows Increase / Decrease Value
Right / Left Arrows Next / Previous Screen
Center Select / Save
Top Left Option
Bottom Left Exit / Go Higher in the Menu
Never try to enter SETUP mode while driving.
To Next Page
Loading...
Need help?
General