COMPUSHIFT II Manual – COMPUSHIFT II Manual
Monitoring & Tuning Your System– 69
•
•
Engine Temp Sensor
Bias
Off
4.2.23.7 Transmission Temp Sensor Bias
This screen allows you to tell COMPUSHIFT II whether or not some other device is providing power to the
transmission temperature sensor. In most cases, COMPUSHIFT is the only device reading transmission temperature,
so you should leave this setting on.
The default setting is "On."
Change the setting to "Off" if you are connecting to an existing controller or temperature gauge that
provides power to the temperature sensor.
Transmission Temp
Sensor Bias
On
4.2.24 System Diagnostics Screen
This self-contained diagnostics system can help you troubleshoot transmission system problems. For more
information, see the section, Diagnostics & Troubleshooting(see page 74).
System Diagnostics
Menu
4.2.25 Display Contrast
The display contrast adjustment lets you choose the most comfortable setting for your angle and lighting situation.
The factory default is satisfactory in most situations, and once set after your installation, further adjustments
are rarely necessary.
Only qualified transmission technicians should use the diagnostic mode, and it should never be used to
drive a vehicle.
To Next Page
Loading...
Need help?
General