HGM COMPUSHIFT II - Gear Lever Position; Transmission Temperature; Transmission Output Shaft Speed; Switch Input Diagnostics

COMPUSHIFT II Manual – COMPUSHIFT II Manual
Diagnostics & Troubleshooting– 78
6.3.4 Gear Lever Position
This screen displays the current gear lever position.
6.3.5 Transmission Temperature
This screen displays the current temperature of the transmission.
6.3.6 Transmission Output Shaft Speed
This screen displays the current reading from the TOSS sensor.
6.3.7 Switch Input Diagnostics
This menu will display current switch input values.
6.3.8 Voltage Input Diagnostics
This screen will show voltages at different controller inputs.
6.3.9 Speed Input Diagnostics
This screen will show the frequency of speed sensors.
6.3.10 Switch Output Diagnostics
This screen will show the status of switch input pullup current sources.
6.3.11 Software Version
This screen displays the current software version information for your reference.