COMPUSHIFT II Manual – COMPUSHIFT II Manual
Monitoring & Tuning Your System– 70
•
•
•
•
Display Contrast
50%
4.2.26 Display Brightness
The display brightness adjustment lets you choose the most comfortable setting for your angle and lighting
situation.
The factory default is satisfactory in most situations, and once set after your installation, further adjustments
are rarely necessary.
Display Brightness
100%
4.2.27 Display Color
The display color adjustment lets you choose your preferred color for the text on the screen.
Edit the Red, Green, and Blue values to mix your custom color.
Display Color
Red Green Blue
10% 100% 35%
4.2.28 System Units
Your COMPUSHIFT II can display units in either metric or US standards.
The default is US. In metric mode, the measurements change as follows:
Speed is measured in KPH instead of MPH.
Temperature is measured in degrees C instead of degrees F.
Vehicle mass is entered in KG instead of LBS.
Pressure is measured in kPA or BAR instead of PSI.
System Units
US
To Next Page
Loading...