HGM COMPUSHIFT II User Manual

2 http://www.hgmelectronics.com/products-compushift-accessories/
COMPUSHIFT II Manual – COMPUSHIFT II Manual
Preparing for Your Installation– 15
An LED lamp can be connected to the wire labeled "OVERDRIVE CANCEL INDICATOR". One side of the LED should be
connected to the wire, and the other side connected to ground.
You do not need to use the "OVERDRIVE CANCEL" or "OVERDRIVE CANCEL INDICATOR" wires unless you want to
prohibit fourth gear. If insulated, the wires can be left unconnected.
HGM stocks a variety of pushbutton switches and indicators
2
or you can provide your own.

HGM COMPUSHIFT II Specifications

General

Brand	HGM
Model	COMPUSHIFT II
Category	Controller
Language	English