Education Sharing System User Manual
16
Connect Directly
Connect via a Switch or a Router
Access via Web Browser
Purpose:
You can get access to the device via web browser. You may use one of the following listed web
browsers: Internet Explorer 6.0, Internet Explorer 7.0, Internet Explorer 8.0, Internet Explorer 9.0,
Internet Explorer 10.0, Apple Safari, and Mozilla Firefox. The supported resolutions include
1024*768 and above.
Before you start:
Obtain the device IP address via SADP software. Refer to the Chapter 15 Appendix
SADP Software Introduction for the detailed steps of obtain online device and modify device
network parameters via SADP software.
Open web browser, input the IP address of the device and then press Enter.
Log in the device.
If the device has not been activated, you need to activate the device first before login.
To Next Page
Loading...
