Education Sharing System User Manual
69
Alarm Output Settings Interface
Select Alarm Output No. to configure in the dropdown list.
Select the Delay duration. The device sends out alarm output signal for the set duration.
Enter Alarm Name.
Configure the arming time. The alarm output signal is only available in arming duration.
1) Select a day in a week to configure arming schedule.
2) Set the arming schedule of the selected day.
3) Optionally, you can click to copy the schedule to other days.
4) Optionally, you can click Copy to to copy the arming schedule to other alarm output
No.
Click Save to save the settings.
Exception
Purpose:
You can specify the triggered linkage action and alarm output when exception occurs.
Go to Configuration > System Settings > Event Configuration > Exception.
To Next Page
Loading...
