Education Sharing System User Manual
65
The above virtual server setting interface is for reference only, it may be different due to different
router manufactures. Please contact the manufacture of router if you have any problems with
setting virtual server.
HTTPS Settings
Purpose:
HTTPS provides authentication of the web site and associated web server that one is
communicating with, which protects against Man-in-the-middle attacks. Perform the following
steps to set the port number of https.
For example, if you set the port number as 443 and the IP address is 192.0.0.64, you may access
the device by inputting https://192.0.0.64:443 via the web browser.
Go to Configuration > System Settings > Network Settings > HTTPS.
HTTPS Interface
Check Enable HTTPS to enable the function.
Click Save to save the settings.
SSH Settings
Purpose:
You can enable SSH feature, thus to effectively prevent information leakage during remote
management.
Go to Configuration > System Settings > Maintenance > Security Service.
To Next Page
Loading...
Need help?
General