Education Sharing System User Manual
63
Two ways are provided for port mapping to realize the remote access via the cross-segment
network, UPnP™ and manual mapping.
UPnP
TM
Settings
Universal Plug and Play (UPnP™) can permit the device seamlessly discover the presence of other
network devices on the network and establish functional network services for data sharing,
communications, etc. You can use the UPnP™ function to enable the fast connection of the device
to the WAN via a router without port mapping.
Before you start:
If you want to enable the UPnP™ function of the device, you must enable the UPnP™ function of
the router to which your device is connected. When the network working mode of the device is set
as multi-address, the Default Route of the device should be in the same network segment as that
of the LAN IP address of the router.
Go to Configuration > System Settings > Network Settings > UPnP.
UPnP™ Settings Interface
Check Enable UPnP™.
Select Port Mapping Type as Manual or Auto.
OPTION 1: Auto
If you select Auto, the port mapping items are read-only, and the external ports are set by the
router automatically.
OPTION 2: Manual
If you select Manual as the mapping type, you can edit the external port as your demand.
You can use the default port No., or change it according to actual requirements.
External Port indicates the port No. for port mapping in the router.
To Next Page
Loading...
