Education Sharing System User Manual
33
Connect education specified speed dome and detection to education sharing system via
network. For detailed steps, refer to 2.4.1 Connect via Analog Connectors.
In auto live view control mode, when the education specified speed dome occurs smart
events or HDMI/VGA multimedia courseware changes, the cameras will be automatically
displayed in the resource channel in the largest window of live view control view according
to the set priority.
You need to log in education specified speed dome configuration interface to configure its
smart detection rules.
Configure Live View Control View
Go to Configuration > Recording Settings > Live View Settings > View Settings.
Live View Control View
Select View Mode.
Movie: You need to set Assistance Mode for movie mode. When one alarm is triggered,
it will display in single screen. But if two or more alarms are trigged, it will display as
what the Assistance Mode is set, including Single Screen, Dual-Screen, and Picture-in-
Picture.
PIP: PIP (Picture-in-picture) is the video display method that when the video is on full
screen, another video is displayed in the inset window at the same time.
Multi-Screen: Multi-image of the camera are displayed simultaneously on the screen.
Select display channel.
To Next Page
Loading...
