User Manual of Digital Video Recorder
145
Send Email
Send an email with alarm information to a user or users when an alarm is detected.
Please refer to Chapter 9.2.13 for details of Email configuration.
Upload Captured Pictures to FTP
Capture the image when an alarm is triggered and upload the picture to a FTP server.
This function is supported by DVR series only. Please set FTP address and configure the remote FTP server first.
Refer to Chapter 9.2.4 for FTP settings.
Trigger Alarm Output (not supported by DS-7200 series)
Trigger an alarm output when an alarm is triggered.
Steps:
1. Enter Alarm Output interface.
Menu> Configuration> Alarm> Alarm Output
Select an alarm output and set alarm name and dwell time.
If “Manually Clear” is selected in the drop-down list of Dwell Time, you can clear it only by going to Menu>
Manual> Alarm and clicking Clear All.
Figure 8. 21 Alarm Output Settings Interface
2. Set arming schedule of the alarm output.
Click to set the arming schedule of alarm output. Choose one day of a week and up to 8 time periods
can be set within each day.
Time periods cannot be repeated or overlapped.
To Next Page
Loading...
Need help?
General