User Manual of Digital Video Recorder
154
3) Enter the User Name and Password registered in the NO-IP website.
Figure 9. 12 NO-IP Settings Interface
• HiDDNS: You need to enter the Server Address and Device Domain Name for HiDDNS, and other
fields are read only.
1) Edit the Server Address of the HiDDNS server. By default, www.hik-online.com will be
automatically available in the Server Address field when HiDDNS is selected.
2) Enter the Device Domain Name. You can register the device domain name in the HiDDNS
server first and then enter the name to the Device Domain Name in the device; you can also
enter the domain name directly on the device to create a new one.
If a new device domain name is defined in the device, it will replace the old one registered on the
server.
Figure 9. 13 HiDDNS Settings Interface
The device name can only contain the lower-case English letter, numeric and ‘-’; and it must start
with the lower-case English letter and cannot end with ‘-’.
Access the Device via Web Browser or Client Software
After having successfully registered the device on the HiDDNS server, you can access your
device via web browser or Client Software with the Device Domain Name (Device Name).
Task 1: Access the Device via Web Browser
Open a web browser, and enter http://www.hik-online.com/alias in the address bar. Alias refers to
the Device Domain Name on the device or the Device Name on the HiDDNS server.
Example: http://www.hik-online.com/dvr
If you mapped the HTTP port on your router and changed it to port No. except 80, you have to
enter http://www.hik-online.com/alias:HTTP port in the address bar to access the device. You can
refer to Chapter 9.2.6 for the mapped HTTP port No.
Task 2: Access the Devices via iVMS-4200
For iVMS-4200, in the Add Device window, select and then edit the device
To Next Page
Loading...
Need help?
General