HIKVISION DS-9204HWI-ST - Page 20

User Manual of Digital Video Recorder
19
If GUARD indicator is blue (default), all the alarm event and exception settings are valid. Otherwise, alarm event
and exception settings are invalid, but normal recording is still available.
It is important to note that you must press the EDIT button on either the remote or front panel on a text field before
you’re able to edit its content. After you’re done entering text, you must hit the ENTER button to be able to move
on to the next field.
DS-7200HWI-SV
Figure 1. 2 Front Panel (2)
Table 1. 2 Description of Control Panel Buttons (2)
No.
Name
Function Description
1
POWER
POWER indicator turns green when DVR is powered up.
2
STATUS
STATUS indicator lights in red when data is being read from or written to
HDD.
3
Tx/Rx
Tx/Rx indictor blinks green when network connection is functioning properly.
4
IR Receiver
Receiver for IR remote.
5
USB Interface
Connects USB mouse or USB flash memory devices.